The 5 cold plunge tubs worth your morning in 2026Top 5 cold plunge tubs of 2026 → See the ranking

The Pod Company Chiller Filters, 2-Pack Review

2 cartridges, a stated 6" × 3" size and 20-micron filtering: the Pod Company Chiller Filters (2-Pack) covers what matters most in a filter pack. It is a good match for owners who swap filters before the water clouds, at 7.2/10 on its documented specs.

Specifications
BrandThe Pod Company
CategoryCold plunge accessories
Stated dimensions6" x 3"
Filter fineness20 micron
Pieces2
Cartridge size6" × 3"
ASINB0F11Q67TH

Full listing title: The Pod Company Chiller Replacement Filters – 2 Pack, 20 Micron Pleated Cartridge, 6" x 3" OD x 3" ID (For Cold Plunge Water Chillers)

Listing evidence
Stated dimensions6" x 3"
Updated October 2026
Exact listing, ASIN B0F11Q67TH
Rating from a published formula

Compared with its rivals

The The Pod Company Chiller Filters (2-Pack) next to the two filter packs rated closest to it.

Compare side by side ↗

The Pod Company Chiller Filters, 2-Pack

The Pod Company Chiller Filters, 2-Pack

7.2Good · out of 10
  • Cold plunge accessories
$26 Price on Nov 18, 2026 · may have changedThis one ↑
DAYEAR 5 x 2.5in Filters, 8-Pack

DAYEAR 5 x 2.5in Filters, 8-Pack

7.1Good · out of 10
  • Cold plunge accessories
$34.99 Price on Nov 18, 2026 · may have changedSee the review ↗
KPPTYTY 5 x 2.5in 20-Micron Filter

KPPTYTY 5 x 2.5in 20-Micron Filter

6.8Good · out of 10
  • Cold plunge accessories
$27.99 Price on Nov 18, 2026 · may have changedSee the review ↗

20-micron filtering

The fineness the listing states, with 2 cartridges in the pack. Finer catches more hair and grit before it clouds the water.

What it has going for it

2-pack

Spares on the shelf, so a clogged filter never has to wait for an order.

6" × 3"

The stated cartridge size: match it against the one in your chiller or pump before ordering.

20 micron

Finer filtering catches more of the hair and dust that make plunge water cloudy.

What changes in your plunge routine

A spare cartridge on the shelf means a cloudy tub gets fixed in a minute, not after a week of waiting for an order. 2 in the pack covers a good stretch of the season.

5-inch or 10-inch cartridge?

This pack is 6" × 3". Pull the cartridge you have now and measure the length first, then the diameter: those two numbers decide the fit.

Best for you if

  • You like spares on the shelf

Skip it if

  • You'd rather wait for buyer reviews: none are captured for this listing yet

What The Pod Company promises

These points come from the seller's own listing, so read them as the brand's claims.

  • 2-pack replacement filters for chillers
  • 20-micron filtration
  • Exact size for proper fit
  • Compatible only if dimensions match
  • Easy drop-in replacement
The Pod Company Chiller Filters, 2-Pack, view 3

Price and availability

Listed at $26 on Nov 18, 2026. Prices move, sometimes within a week, so treat it as a guide: the button always shows today's price and stock.

$26 Price on Nov 18, 2026 · may have changed
At a glance
Price
$26
Checked
Nov 18, 2026

Better fit elsewhere?

The verdict

Our favourite thing about the Pod Company Chiller Filters (2-Pack) is 2 cartridges, closely followed by a stated 6" × 3" size. No buyer reviews yet, so the Pod Company Chiller Filters (2-Pack) has to win you over on paper. Where it falls short: photos that can't tell you how well it fits your own tub. We'd pick it if you like spares on the shelf; otherwise, put it next to the DAYEAR 10 x 2.5in Filters (6-Pack) first.

The one thing we'd check first

Before you order the Pod Company Chiller Filters (2-Pack) and wait for the delivery truck, check the cartridge size: it is stated at 6" × 3", so compare it with the one in your chiller.

Before you buy

The fit

Lay your old cartridge on a tape measure: length first, then the outer diameter.

How often

Rinse weekly and swap when it stays dirty after rinsing; 2 in the pack covers a good stretch.

How it compares

How the Pod Company Chiller Filters (2-Pack) stacks up against the closest alternative, the DAYEAR 10 x 2.5in Filters (6-Pack).

CriterionThe Pod Company Chiller Filters, 2-PackDAYEAR 10 x 2.5in Filters, 6-Pack
Our rating7.2/107.1/10
Made for6" × 3"10" × 2.5"
Cartridges26
Filter fineness20 micron20 micron

Pick the DAYEAR 10 x 2.5in Filters (6-Pack) if you care more about 6 cartridges in the pack; on our rating, the Pod Company Chiller Filters (2-Pack) comes out ahead.

The score in detail

Key specifications

7 / 10

Build, warranty & certifications

4 / 10

Listing documentation

7 / 10

Fit & compatibility

9 / 10
How we rated it

Spec-based rating on a 4.5–8.5 scale: 4.5 + average of the 4 criteria × 0.4. Capped at 8.5 because no customer evidence is included.

This product has no captured buyer-review record yet, so its rating comes from the documented listing alone: four criteria scored out of 10 (key specifications; build, warranty and certifications; listing documentation; fit and compatibility), placed on a 4.5–8.5 scale. Read the full methodology.

Read the methodology →

Frequently asked questions

Is the Pod Company Chiller Filters (2-Pack) any good?

We rate it 7.2/10 (good). The rating comes from its documented listing alone, as no customer-review record is captured yet.

What do you get with the Pod Company Chiller Filters (2-Pack)?

Its listing states 2 cartridges, a stated 6" × 3" size and 20-micron filtering. Those are the seller's figures; how well it suits your tub is worth confirming with the seller.

What should I check before ordering the Pod Company Chiller Filters (2-Pack)?

The fit: lay your old cartridge on a tape measure: length first, then the outer diameter. How often: rinse weekly and swap when it stays dirty after rinsing; 2 in the pack covers a good stretch.

Where can I buy the Pod Company Chiller Filters (2-Pack)?

We link to the exact listing on Amazon, where today's price, stock and seller apply. It is an affiliate link, and it has no effect on the rating.