The 5 cold plunge tubs worth your morning in 2026Top 5 cold plunge tubs of 2026 → See the ranking

The Pod Company Standard 1/3HP Chiller Review

We like the Pod Company Standard 1/3HP Chiller for the mix: 1/3 HP of cooling, water down to a stated 41°F and 20-micron filtration. 27 buyers rate it 3.4/5, and it suits smaller tubs in a cool garage or basement.

Specifications
BrandThe Pod Company
CategoryStandalone water chillers
Chiller power1/3 HP
Lowest stated water temperature41°F
Filter fineness20 micron
Buyer reviews27 · 3.4/5
ASINB0F6NWFWMP

Full listing title: The Pod Company Standard Water Chiller – 1/3 HP – 41°F Cold Plunge Cooling System – Compact, Energy-Efficient, and Ideal for Daily Home Use – Compatible with Ice Pod Pro & Long Pod

Updated October 2026
Exact listing, ASIN B0F6NWFWMP
Rating from a published formula

Compared with its rivals

The The Pod Company Standard 1/3HP Chiller next to the two plunge chillers rated closest to it.

Compare side by side ↗

Beyond Marina 1/2HP Ice Bath Chiller

Beyond Marina 1/2HP Ice Bath Chiller

6.7Good · out of 10
  • Stated capacity: 66 gal
  • Standalone water chillers
$699.99 Price on Nov 18, 2026 · may have changedSee the review ↗

Down to a stated 41°F

The lowest water temperature the seller states for this chiller. How close your tub gets depends on its size, the lid and how hot the day is.

What it has going for it

1/3 HP

A smaller compressor: fine for a compact tub in a shaded spot, slower in full summer sun.

Down to 41°F

The seller states 41°F as the lowest water temperature. How fast it gets there depends on your tub, the lid and the weather.

20-micron filter

Filtration in the same loop as the cooling: one circuit to plumb, one routine to keep.

What changes on your plunge mornings

It turns any tub with the right fittings into a cold plunge that is ready when you are, with no ice runs and no guessing how cold it is.

The water runs through a filter as it cools, which is what keeps hair and grit out of the water you sit in.

Small tub or big tub?

The listing gives no rated tub volume, so ask the seller before you pair it with a big tub.

It has 1/3 HP. A smaller compressor does best in the shade, with a lid on.

Best for you if

  • You want a plunge chiller for smaller tubs in a cool garage or basement

Skip it if

  • You want a long review record: only 27 buyer reviews so far
  • Star ratings come first for you: 3.4/5 is below the 4.0 average of our ranked picks

What The Pod Company promises

These points come from the seller's own listing, so read them as the brand's claims.

  • Consistent, ice-free cooling
  • Made for the pods
  • Energy-efficient & quiet
  • Plug-and-plunge simplicity
The Pod Company Standard 1/3HP Chiller, view 3

Setup and what you get

Setup day. Connect the hoses to your tub, prime the pump, then give it a night to pull the water down.

Its spot. Next to the tub, on a firm surface, with air around it and an outlet in reach.

The Pod Company Standard 1/3HP Chiller, view 4

What buyers say

Buyers give it 3.4/5, a mixed record, below our ranked picks' 4.0 average. Only 27 reviews so far, and our formula damps averages built on fewer than 50.

The numbers
Buyer rating
3.4/5
Reviews
27
Ranked picks' average
4.0/5

Price and availability

We don't have a recent dated price for this listing, and we would rather not guess. The button shows today's price and stock.

The Pod Company Standard 1/3HP Chiller, view 5

Better fit elsewhere?

The verdict

We like the Pod Company Standard 1/3HP Chiller for 1/3 HP of cooling and water down to a stated 41°F. Only 27 buyers have rated it so far (3.4/5), so treat the score as an early read. Where it falls short: their 3.4/5 average sits under the 4.0 of our ranked picks. We'd pick it if you want a plunge chiller for smaller tubs in a cool garage or basement; otherwise, put it next to the QAUSOU 1HP Chiller and Heater first.

The one thing we'd check first

Before the Pod Company Standard 1/3HP Chiller lands on your porch, check the tub size it suits: the listing gives no rated volume, so ask the seller before you order.

Before you buy

Your tub size

No tub size is stated: ask the seller what volume it is built for before you order.

Power and outlet

A 1/3 HP unit wants its own grounded outlet, ideally GFCI-protected, close enough for the cord.

Airflow and spot

Give it space on every side to breathe and keep it out of direct rain unless the listing says otherwise.

Hoses and fittings

Check that the hose size and fittings match the ports on your tub; adapters are a common extra.

How it compares

How the Pod Company Standard 1/3HP Chiller stacks up against the closest alternative, the QAUSOU 1HP Chiller and Heater.

CriterionThe Pod Company Standard 1/3HP ChillerQAUSOU 1HP Chiller and Heater
Our rating6.8/106.8/10
Power1/3 HP1 HP
Lowest stated temp41°F37°F
HeatingNot statedStated
Wi-Fi appNot statedStated
Buyer reviews27 · 3.4/51 · 5.0/5

Both score 6.8/10. The QAUSOU 1HP Chiller and Heater adds more cooling power (1 HP) and a colder stated low (37°F).

The score in detail

Key specifications

6 / 10

Build, warranty & certifications

3 / 10

Listing documentation

6 / 10

Fit & compatibility

8 / 10
How we rated it

Spec-based rating on a 4.5–8.5 scale: 4.5 + average of the 4 criteria × 0.4. Capped at 8.5 because no customer evidence is included.

This product has no captured buyer-review record yet, so its rating comes from the documented listing alone: four criteria scored out of 10 (key specifications; build, warranty and certifications; listing documentation; fit and compatibility), placed on a 4.5–8.5 scale. Read the full methodology.

Read the methodology →

Frequently asked questions

Is the Pod Company Standard 1/3HP Chiller any good?

We rate it 6.8/10 (good). The rating comes from its documented listing alone, as no customer-review record is captured yet.

What do you get with the Pod Company Standard 1/3HP Chiller?

Its listing states 1/3 HP of cooling, water down to a stated 41°F and 20-micron filtration. Those are the seller's figures; how well it suits your tub is worth confirming with the seller.

What should I check before ordering the Pod Company Standard 1/3HP Chiller?

Your tub size: no tub size is stated: ask the seller what volume it is built for before you order. Power and outlet: a 1/3 HP unit wants its own grounded outlet, ideally GFCI-protected, close enough for the cord. Airflow and spot: give it space on every side to breathe and keep it out of direct rain unless the listing says otherwise. Hoses and fittings: check that the hose size and fittings match the ports on your tub; adapters are a common extra.

Where can I buy the Pod Company Standard 1/3HP Chiller?

We link to the exact listing on Amazon, where today's price, stock and seller apply. It is an affiliate link, and it has no effect on the rating.

Keep comparing

If the The Pod Company Standard 1/3HP Chiller hasn't sold you yet, see where it ranks, read the guides that feature it or browse all standalone water chillers.

Read this before you buy